1. <rp id="ss2ko"><acronym id="ss2ko"><blockquote id="ss2ko"></blockquote></acronym></rp>
    2. <th id="ss2ko"></th>
      <dd id="ss2ko"></dd><th id="ss2ko"></th>

      <button id="ss2ko"></button>
      Link
      DEGA
      maag
      INOEX
      ABB

      Products

      • Narrow Gap Coating Die Series

        Narrow gap coating die head can produce a very thin coating and transparent optical coatings, also can make the coating is kept in very exact tolerances range
        More >>
      • Hollow Cross Section Plate Die Series

        PC hollow plate used widely in constructions and decorations.The hollow grid plate die and feedblock can make UV protection on both sides.The final production
        More >>
      • Waterproof Sheet Coil Die Series

        PVC, EVA, PE new type of waterproof material have high performance of anti-permeability, water-proofness, thermo-stability and cryogenic
        More >>
      • Sheet Die Series-JW-F-A1

        PVC coating die adopts special channel of coat-hanger structure, adjustable upper die lip, perpendicular blocking
        bar, the thickness of production can be adjusted. In pairs
        More >>
      • Sheet Die Series-JW-B-B1

        The die adopts a typical coat-hanger channel, and adjustable upper die lip, changeable lower lip and perpendicular blocking bar. With ST-model width-control system
        More >>
      • Sheet Die Series-JW-B-CF

        Double flow channels design,the upper and lower die lips are adjustable with the oil temp control,the skinning effection
        of the products surface is
        More >>
      • Sheet Die Series-JW-B-A1

        With special coat-hanger channel design, the die minimizes ablation of heatsensitive material. With the adjustable upper die lip, changeable lower die lip and perpendicular blocking bar
        More >>
      • Sheet Die Series-JW-P-A2

        With special coat-hanger channel design, adjustable upper die lip, changeable lower die lip and 45°blocking bar, the
        die adapt to ABS, PE, PP thick plate with the width below 2000mm and thickness between 3-30mm.
        More >>
      • Sheet Die Series-JW-B-C1

        Standard coat-hanger design, the upper die lip adjusting adopts the push-pull type or push-out fine-tuning type;the lower die lip can exchange, the maximum adjusting range up to 5 mm, it is suitable for the production of PC, PMMA, GPPS, PET, single-layer or multi-layer high transparent sheet or plate
        More >>
      • Sheet Die Series-JW-P-C2

        Adopting gradually water drop shape and flat shoulder type flow channel ,with triangle diversion technology, ladder style flow, effectively eliminate the extrusion process for high pressure lead to mould mouth deformation.The upper die lip is a manual push-off type fine-tuning
        More >>
      • Sheet Die Series-JW-P-C1

        With coat-hanger channel design, adjustable upper die lip, changeable lower die lip and 45°blocking bar, the die is fit for PVC, PS, PP, PE, PC single or multi layer sheet with the thickness of 0.8-12mm.
        More >>
      • Sheet Die Series-JW-P-D1

        With multi-manifold design, the die can combine the materials inside to ensure the accuracy of the film. The die adopts micro-adjustable upper die lip, fixed lower lip and 45° blocking bar, which is fit for PC, PS, PP, PE, PLA multi-layer co-extrusion sheet.
        More >>
      • Sheet Die Series-JW-P-AT1

        Auto-adjusting die, the upper die lip is adjusted by the auto-control system which divided into manual-control unit and
        auto control unit; the first can control the accuracy in 1mm and the latter 300um. Fits for PC, PS, PP, PE, PLA single-layer
        or multi-layer sheet or film with different width.
        More >>
      • Sheet Die Series-JW-P-A1

        With coat-hanger channel, micro-adjustable upper die lip, the die is perfect for single-layer or multi-layer PET(APET,
        PET)PC, PS, PP, PLA plate with the width ≤2100mm, and the thickness between 0.14-2mm.
        More >>
      • Sheet Die Series-JW-P-K1

        Fast opening die series, the upper die lip with fine-tuning push-pull type, the flexible lower die lip can adjusting product thickness on-line without stop, the Max adjusting range up to 5 mm, Equip with 45 °blocking bar, it is suitable for produce
        PC, PS, PP, PE, PLA, single-layer or multi-layer plate .
        More >>
      • Film Die Series

        The die head adopts an extension V shape water-drop type flow channel,with the shunt technology and special triangle stabilize structure. To composite layer and improve the precision of the extrusion process to eliminate 'M' shape and 'W' shape flow patterns effectively. The upper die lip
        More >>
      • High-speed Film Coating Die Series

        Jwell Company’s high-speed film coating die adopt T-type thick edge with manual adjustment system to simplify the product width switching operation and online adjusting.
        More >>
      • Biaxially Oriented Die

        The die is crucial part of the biaxially oriented cast sheet, directly decided to cast sheet shape and thickness uniformity. This biaxially oriented casting sheet die adopt coat hanger flow channel design,
        More >>
      • Plastic Melt Measuring Gear Pump

        Equipping a gear pump in front of the extruder, checking pressure before the pump and controlling the speed of extrusion, which can minimizing pulsation and irregular
        More >>
      • Hydraulic Screen Changer System

        Double-panel hydraulic non-stop screen changer series:
        ●Adopts advanced pressure seal technology, through the pressure of polymers to drive seal components, to achieve the best sealing effect
        More >>
      • Hydraulic Screen Changer System

        Single column hydraulic screen changer series:
        ●No mechanical seal structure, which can guarantee the high pressure and
        high temperature condition not seep materials. Effectively reduce the change
        screen resistance, reduce hydraulic system pressure of work.
        More >>
      • Screen Changer System

        JWELL’s hydraulic screen changer system widespread use in all kinds of plastic products, plastic granulation etc, the perfect design and careful
        More >>
      • Hydraulic Screen Changer System

        Double column with double working position hydraulic screen changer series:
        ●No mechanical seal structure, which can guarantee the high pressure and high temperature condition not seep material. Effectively reduce the
        More >>
      • Hydraulic Screen Changer System

        Single-panel with double working position screen changer:
        ●Extruder screw can draw from the screen changer directly, it is convenient to remove and clean,
        ●Adopts advanced pressure adaptive sealing technology, through the pressure of polymers to drive seal components, to achieve the best
        More >>
      • Multi-layer Co-extrusion Distributor

        Multi-layer co-extrusion feedblocks are suitable for various polymer plastic materials. Bases on the customs’ different requirements, a combination of T-die and co-extrusion feedblock
        More >>
      • Narrow Gap Coating Die Series

        Narrow gap coating die head can produce a very thin coating and transparent optical coatings, also can make the coating is kept in very exact tolerances range
        More >>
      • Hollow Cross Section Plate Die Series

        PC hollow plate used widely in constructions and decorations.The hollow grid plate die and feedblock can make UV protection on both sides.The final production
        More >>
      • Waterproof Sheet Coil Die Series

        PVC, EVA, PE new type of waterproof material have high performance of anti-permeability, water-proofness, thermo-stability and cryogenic
        More >>
      • Sheet Die Series-JW-F-A1

        PVC coating die adopts special channel of coat-hanger structure, adjustable upper die lip, perpendicular blocking
        bar, the thickness of production can be adjusted. In pairs
        More >>
      • Sheet Die Series-JW-B-B1

        The die adopts a typical coat-hanger channel, and adjustable upper die lip, changeable lower lip and perpendicular blocking bar. With ST-model width-control system
        More >>
      • Sheet Die Series-JW-B-CF

        Double flow channels design,the upper and lower die lips are adjustable with the oil temp control,the skinning effection
        of the products surface is
        More >>
      • Sheet Die Series-JW-B-A1

        With special coat-hanger channel design, the die minimizes ablation of heatsensitive material. With the adjustable upper die lip, changeable lower die lip and perpendicular blocking bar
        More >>
      • Sheet Die Series-JW-P-A2

        With special coat-hanger channel design, adjustable upper die lip, changeable lower die lip and 45°blocking bar, the
        die adapt to ABS, PE, PP thick plate with the width below 2000mm and thickness between 3-30mm.
        More >>
      • Sheet Die Series-JW-B-C1

        Standard coat-hanger design, the upper die lip adjusting adopts the push-pull type or push-out fine-tuning type;the lower die lip can exchange, the maximum adjusting range up to 5 mm, it is suitable for the production of PC, PMMA, GPPS, PET, single-layer or multi-layer high transparent sheet or plate
        More >>
      • Sheet Die Series-JW-P-C2

        Adopting gradually water drop shape and flat shoulder type flow channel ,with triangle diversion technology, ladder style flow, effectively eliminate the extrusion process for high pressure lead to mould mouth deformation.The upper die lip is a manual push-off type fine-tuning
        More >>
      • Sheet Die Series-JW-P-C1

        With coat-hanger channel design, adjustable upper die lip, changeable lower die lip and 45°blocking bar, the die is fit for PVC, PS, PP, PE, PC single or multi layer sheet with the thickness of 0.8-12mm.
        More >>
      • Sheet Die Series-JW-P-D1

        With multi-manifold design, the die can combine the materials inside to ensure the accuracy of the film. The die adopts micro-adjustable upper die lip, fixed lower lip and 45° blocking bar, which is fit for PC, PS, PP, PE, PLA multi-layer co-extrusion sheet.
        More >>
      • Sheet Die Series-JW-P-AT1

        Auto-adjusting die, the upper die lip is adjusted by the auto-control system which divided into manual-control unit and
        auto control unit; the first can control the accuracy in 1mm and the latter 300um. Fits for PC, PS, PP, PE, PLA single-layer
        or multi-layer sheet or film with different width.
        More >>
      • Sheet Die Series-JW-P-A1

        With coat-hanger channel, micro-adjustable upper die lip, the die is perfect for single-layer or multi-layer PET(APET,
        PET)PC, PS, PP, PLA plate with the width ≤2100mm, and the thickness between 0.14-2mm.
        More >>
      • Sheet Die Series-JW-P-K1

        Fast opening die series, the upper die lip with fine-tuning push-pull type, the flexible lower die lip can adjusting product thickness on-line without stop, the Max adjusting range up to 5 mm, Equip with 45 °blocking bar, it is suitable for produce
        PC, PS, PP, PE, PLA, single-layer or multi-layer plate .
        More >>
      • Film Die Series

        The die head adopts an extension V shape water-drop type flow channel,with the shunt technology and special triangle stabilize structure. To composite layer and improve the precision of the extrusion process to eliminate 'M' shape and 'W' shape flow patterns effectively. The upper die lip
        More >>
      • High-speed Film Coating Die Series

        Jwell Company’s high-speed film coating die adopt T-type thick edge with manual adjustment system to simplify the product width switching operation and online adjusting.
        More >>
      • Biaxially Oriented Die

        The die is crucial part of the biaxially oriented cast sheet, directly decided to cast sheet shape and thickness uniformity. This biaxially oriented casting sheet die adopt coat hanger flow channel design,
        More >>
      • Plastic Melt Measuring Gear Pump

        Equipping a gear pump in front of the extruder, checking pressure before the pump and controlling the speed of extrusion, which can minimizing pulsation and irregular
        More >>
      • Hydraulic Screen Changer System

        Double-panel hydraulic non-stop screen changer series:
        ●Adopts advanced pressure seal technology, through the pressure of polymers to drive seal components, to achieve the best sealing effect
        More >>
      • Hydraulic Screen Changer System

        Single column hydraulic screen changer series:
        ●No mechanical seal structure, which can guarantee the high pressure and
        high temperature condition not seep materials. Effectively reduce the change
        screen resistance, reduce hydraulic system pressure of work.
        More >>
      • Screen Changer System

        JWELL’s hydraulic screen changer system widespread use in all kinds of plastic products, plastic granulation etc, the perfect design and careful
        More >>
      • Hydraulic Screen Changer System

        Double column with double working position hydraulic screen changer series:
        ●No mechanical seal structure, which can guarantee the high pressure and high temperature condition not seep material. Effectively reduce the
        More >>
      • Hydraulic Screen Changer System

        Single-panel with double working position screen changer:
        ●Extruder screw can draw from the screen changer directly, it is convenient to remove and clean,
        ●Adopts advanced pressure adaptive sealing technology, through the pressure of polymers to drive seal components, to achieve the best
        More >>
      • Multi-layer Co-extrusion Distributor

        Multi-layer co-extrusion feedblocks are suitable for various polymer plastic materials. Bases on the customs’ different requirements, a combination of T-die and co-extrusion feedblock
        More >>
      good影音网,good在线观看,三级、韩国伦理片电影手机在线播放